Corporate Updates/Events, Press Releases

Flow Sciences’ Bulk Powder Weighing Enclosures

PRESS RELEASE

Contact: Flow Sciences, Inc.

Tel: (800) 849-3429

Fax: (910) 763-1220

 

 

 

 FOR IMMEDIATE RELEASE

Flow Sciences’ Bulk Powder Weighing Enclosures

LELAND, NC, June 26, 2018 — Weighing powder from a 30-gallon drum? Flow Sciences, Inc. offers Bulk Powder Enclosures that are an effective system for bulk powder applications and large drum loading/unloading. The systems are available in several standard sizes, ranging from 4’ through 8’ exterior width.  A 20” diameter cut-out in the base allows for raising of the powder drum up and into the enclosure. This feature allows for safe weighing without interference stemming from data fluctuation or powder loss.

Bulk Powder Weighing Enclosures are shipped with 3 sizes of rubber membranes which can be cut to adapt to a wide variety of drums. To install, one simply pulls the membrane over the rim of the drum and installs a stainless steel ring to facilitate an air/powder leak-tight seal. Also available is a foot-controlled hydraulic lift (model 6551) which allows for ergonomic lifting of the drum up into the enclosure through the drum cut-out opening.

Results of Factory Acceptance Tests (FAT) and Site Acceptance Testing (SAT) have proven that Bulk Powder Weighing enclosures meet the performance requirements to retain containment below 1 microgram per cubic meter (μg/m³).  For more potent powders, a gloved Bulk Powder Hybrid Isolator is also available.

[dt_fancy_separator]

For a PDF of this Press Release or for questions or comments, please contact us below:

[dt_fancy_separator]

About Flow Sciences, Inc.

Flow Sciences is the world’s leading developer of containment solutions for research and development laboratories, pilot plants, automation equipment and robotics, manufacturing and production facilities where toxic or noxious potent powders, fluids, or gases require safe handling while weighing, mixing, processing, or manufacturing. Since its start in the 1980s and with the introduction of the Vented Balance Safety Enclosure (VBSE™) in the 1990s, Flow Sciences has gone on to develop a comprehensive line of over 500 enclosures, including industry standards like the Vented Balance Safety Enclosure (VBSE™), the Contained Vented Bulk Powder Enclosure, and innovative laboratory technologies like the FS1501 Nitrogen Controller and the Bag-In/Bag-Out HEPA Filtration System. For its accomplishments, Flow Sciences received an Expert Achievement Award from the U.S. Department of Commerce for accomplishments in the global marketplace, the Deloitte and Touche North Carolina Technology Fast 50 Award, the UIBS R&D and Technology Collaboration Award, along with many others. During the 1990s, Flow Sciences pioneered the Vented Balance Safety Enclosure Series (VBSE™) which introduced the first independent fan exhaust system to isolate vibrations for balance accuracy, swiftly becoming the world leader in laboratory safety equipment. Flow Sciences technologies are now used to improve safety and containment in virtually every industrial sector around the globe, from pharmaceutical, food processing, robotics, chemical, forensics, agriculture, academia, infectious diseases, asbestos, tires, biotechnology, batteries, and nanotechnology. Flow Sciences has over 30 years of expertise in the development of containment solutions that deliver superior engineering quality and service at each level of controlled airflow containment systems. Flow Sciences offers the incorporation of Computational Fluid Dynamics (CFD), further refining the process of presenting personnel and product protection through framed enclosure solutions. The company’s Flow Sciences China division serves as a market leader in mainland China, spearheading the development of solutions throughout Asia. Under its Flow Sciences brand, Flow Sciences offers the best in laboratory containment, and is committed to finding containment solutions that meet your needs.

 

All other product names and trademarks are the property of their respective owners, which are in no way associated or affiliated with Flow Sciences.

 

Headquarters: Leland, NC USA:

Flow Sciences, Inc., 2025 Mercantile Drive, Leland, NC 28451;

Tel: 1-800-849-3429, Fax: 1-910-763-1220, Email: information@flowsciences.com,

Web: https://www.flowsciences.com/

 

Flow Sciences, Inc. Public Relations:

Jonathan Mann 2025 Mercantile Drive, Leland, NC 28451;

Tel: 1-910-332-4846 direct, Email: jmann@flowsciences.com,

Web: https://www.flowsciences.com

Related Posts