Dual Operator Glovebox Workstation with Balance Enclosure is designed to contain a process applicaiton where both weighing in an open faced enclosure and working with a reactor in a clean air environment are needed.  The weighing portion of the unit is designed to contain a Mettler-Toledo XS204 balance.  This weighing unit is connected to a Glovebox Workstation with an ISO 5 or better interior environment.  The glovebox workstation contains a Senco FC202 Cap Style Jacketed Glass Reactor.  This system is unique as it allows for operators to manipulate the reactor at two heights, with dual glove ports at a low poistion and high position.  The glovebox also features valves for both nitrogen and compressed air.

137” Exterior Width
32” Exterior Depth
52” Interior Height

FSI Category: 10+






SAFETY.  The Glovebox Workstation series provides containment for highly toxic applications using APIs that need more safety than an opened face enclosure. FSI engineering controls are built in to prevent loss of containment. Third Party testing has proven containment on these units to below 50 ng/m³ based on process and quantity.

DESIGN.  Designed as the next step in containment above the FSI Hybrid Isolator, this unit is able to effectively contain using HEPA clean air inlet and HEPA air out. This creates laminar airflow across the interior. The Glovebox Workstation is equipped with dual 4” thick HEPA filters that can be recirculated into the lab or sent directly to house exhaust.

ISO 5 INTERIOR CLEANLINESS. The HEPA inlet provides the interior with a laminar airflow. This HEPA clean environment meets or exceeds ISO 5 for clean processing of work while protecting operators from exposure.

FRONT LIFT DOOR.  The glove ports sit in a front lift door that opens vertically to effectively load and unload equipment. This door is hinged for ease of use.

PHENOLIC BASE.  The chemically resistant phenolic base is dished to maintain spills and protects the work surface from harmful chemicals.

INTERNAL LED LIGHT.  This enclosure features an internal LED light for improved visibility inside of the enclosure and can be adjusted directly on to the application. This light comes standard with every Glovebox Workstation Enclosure.

STANDARD SIZES.  The Glovebox Workstation series is available in 4, 5, and 6 foot standard width options. Customs are available.

The HEPA inlet provides the interior with a laminar airflow. This HEPA clean environment meets or exceeds ISO 5 for clean processing of work while protecting operators from exposure.

The Bag-in/Bag-out Dual HEPA exhaust ensures safe recirculation of air into the room or connection to house exhaust.


Get a Quote / Info

  • What is being done inside of the enclosure? What type of material (powder, liquid, gas, nuisance odor) is being worked with? How does the material enter and exit the enclosure system? etc...
  • What type of filtration is required? Single HEPA, Dual HEPA, Carbon, House Exhaust, etc... What is the required OEL (Occupational Exposure Limit) for the process, or any other details about containment goals? What is the quantity of powder or liquid, task duration, composition of powder, etc...?
  • What equipment is being worked with? What is the equipment model, size, scope, function, and any other information that will affect the design of the enclosure, including movement, heat output, etc...? *State the specific equipment make and model if available*
  • Drop files here or
  • Are there any additional notes or information that should be considered? Are there any special design requirements?

 2025 Mercantile Dr., Leland, NC 28451
 Phone: 1-800-849-3429
 Fax: (910) 763-1220

© 2019 Flow Sciences, Inc. All rights reserved

Privacy Preference Center